Advertisement
SONY
QUICK SETUP GUIDE
Pairing Txs to Rx
Using Crossremote, you can control many of the parameters within a Tx from the Rx top panel or within a Sound
Devices 8-series mixer. This link is across a separate 2.4gHz network generated by the Rx and a data pairing has
to be established.
Rx
Power on channel 1 or 2 whilst holding the
Minus (-) button
Tx
Power on whilst holding
the Minus (-) button
The Receiver will scan for the name of the Tx. Once found, press 'Set' and the data link will be established. You
should see the following screens:
TX1
K
DWX
Slot-In Bundle
Contact Karno Sound for 24hr support:
07747515123 | 07715103222 | 07952129649
Email : contact@karnosound.com
TX1
RF REMOTE
SCANNING...
Power on side
TX1
---
L
Tx 1
SCANNING...
+
POWER
-
TX1
4.
Advertisement
