Advertisement
Available languages
Available languages
1. Press
/
different modes are available: comfort mode and economy mode.
The icon of the current setting mode for the hour flashes.
Press
to select the comfort mode , or press
nomy mode
Each time you press the
comfort mode or economy mode is immediately saved and, at the
same time, you automatically switch to the setting for the next hour.
If you want to change the setting of the previous time, you must first
press the button
2.After setting the 24th hour, press
tically save the settings and return to the initial setting interface.
- For example, if you set P3 from the interface below (day 1, P3),
the unit will return to the interface below (day 1, P3) when you finish
setting the 24th hour of P3. The modified P3 program already re-
places the manufacturer's default P3 setting.
NOTES: In the event of a power failure, only the settings, temperature
and operating mode will be retained in memory. When the power is res-
tored, the clock must be reset to allow normal use of the Program Mode.
After completing the program mode settings, they are saved, but the
unit does not automatically start operating in the program mode.
The unit does not automatically begin operating in Program Mode.
You must press the left/right arrow buttons to select Program Mode
and operate the heater in that mode.
the heater in this mode.
to select the time (from 1 to 24). For each hour, two
(blank display), or OK to keep the previous setting.
/
,and then press the
button or the OK button, the selected
/
hour (01 corresponds to
hour 1 to 2, and so on. 24
corresponds to hour 24
to 1).
/
or OK, the unit will automa-
33
to select the eco-
button.
Advertisement
