Advertisement
Available languages
Available languages
Contact details
INSTRUCTIONS REPLACEABLE COMPONENTS
If the power cable is damaged, it must be replaced by the manufacturer, its
service department or similarly qualified persons in order to avoid a hazard.
The installation of the appliance in a bathroom is IMPERATIVELY
carried out in volume 2 or out of volume in accordance with the NFC
15-100. The installation must be done by a qualified electrician to avoid
any danger. The volumes illustrated in the NFC 15-100 standard are
defined in relation to a bathtub or a shower tray, regardless of the room.
Other appliances (washbasins, bidets, sinks and other water points)
are not concerned.
1/ Determine the right location
Choose a suitable location for your heater, which must be firmly at-
tached to the wall.
This appliance must never be used upside down, tilted or at 90°. It must
be mounted parallel to the wall (the wall must be vertical to the floor).
- Observe the minimum distances between the heater and walls, floor,
furniture, curtains, etc. (as shown in Fig. 1).
- Do not install the unit in an air stream that could disturb its regulation.
- Do not place the unit near obstacles that restrict the air flow around it.
- Choose screws and plugs suitable for the wall material and
the weight of the unit.
- Do not make any changes to the unit or its mounting bracket.
BATIMEX SAS
112 Rue Ampère 13830 Roquefort-la-Bédoule France
INSTALLATION INSTRUCTIONS
room temperature control,
with presence sensor
room temperature control
with open window sensor
remote control option
adaptive activation control
activation time limitation
black globe sensor
25
[no]
[yes]
[no]
[no]
[no]
[no]
Advertisement
