Advertisement
Available languages
Available languages
19.0
Program mode
NOTE: For Program Mode, the setting and mode selection are
separate. To set the program mode, press MENU to display the
setup menu and select the program mode setting, then press OK
to display the setup interface.
Pilot Wire Mode
- Press the
/
Leadframe mode). In the Pilot Wire mode, select the mode via the
external control (for France only).
- When the interface is in Program mode, press the OK button for
3s to switch from Program mode to Pilot wire mode.
- For countries other than France, if you choose the Pilot Wire
mode, the unit will operate in the Comfort mode by default.
- Depending on the programs stored on the external programmer,
the screen displays the following information received:
pilot control mode setting
Comfort
mode
Comfort
mode
Comfort
mode
Eco
mode
Frost protec-
tion
Standby mode
Program Mode
- Press MENU to display the setting interface, then press
select the Program Mode setting.
When
is flashing, press OK to display the setting interface.
- In program mode, you can choose from 7 preset 24-hour pro-
12:00
buttons to select the mode
P
Pilot wire mode
Icone display
31
12:00
(Program mode or
/
to
Advertisement
