Out Of The Box; Connect Power - Honeywell CT4 Series User Manual

Out of the Box

Make sure that your shipping box contains these items:
•
•
•
•
If any of these items are missing or appear damaged, contact your Customer
Account Representative. Keep the original packaging in the event that you need to
return the base for service or if you want to store the base while not in use.

Connect Power

Use only a UL Listed power supply that has been qualified by Honeywell with an
output rated at 12V/7A. The power supply input rating is 100-240 VAC, 50/60 Hz.
The operating temperature is -10 °C to 50 °C (14 °F to 122 °F).
1. Plug the power cord into the power supply.
2. Plug the power supply cable into the power connector on the back of the base.
3. Plug the power cord into a standard wall outlet.
20
CT40-CB-UVN/CT40-CB-UVB/CT40-NB-UVN/CT40-NB-UVB
Removable
Cup
Cup Release
Latch
Charge Base (CT40-CB-PB, CT40-CB-UVN, CT40-CB-UVB) or
Ethernet Base (CT40-NB-PB, CT40-NB-UVN, CT40-NB-UVB)
Power supply
Power cord (if purchased)
Product documentation
Ethernet
Connectors
Power
(CT40-NB-UVN/
Connector
CT40-NB-UVB)
CT4x Series Accessories User Guide