Symbols Explained; Specification; Power Supply Cord; Operating Instructions - ProBreeze PB-AC07-US Instruction Manual

Always inspect new batteries before use. Damaged or
•
weak batteries may leak acid. Discontinue use if batteries
show signs of leakage, damage, or weakness at any time.
Ensure the battery compartment is correctly and
•
securely closed after installing the batteries.
Wash hands after handling batteries.
•
Disposable batteries are not rechargeable and must
•
be recycled or disposed of separately from household
waste. Always dispose of batteries at an official collection
point and according to your local environmental laws
and guidelines.
SAVE THESE INSTRUCTIONS!

SYMBOLS EXPLAINED

― ―
For indoor use only.
SPECIFICATIONS
― ―
• Product Dimensions: 11.9" x 11.4" x 25.9"
• Net Weight: 13.34lb
• Gross Weight: 17.22lb
• Voltage: 120V~
• Frequency: 60Hz
• Power: 65W
• Noise Level: <65dB
8 of 48 | English
Please read instruction manual
and retain for future use.

POWER SUPPLY CORD

― ―
1. If the power supply cord is too short, do not use an extension cord. Have a qualified
electrician or serviceman to install an outlet near the appliance.
2. If it is absolutely necessary to use longer cord sets or an extension cord, extreme care must
be exercised.
• The marked electrical rating of the cord set or extension cord must equal to or greater than
the electrical rating of the appliance. The longer cord should be arranged so that it will not
drape over the counter top or table top where it can be pulled on by children or tripped over
unintentionally.
NOTE: Pro Breeze do not accept any liability for damage to the product or personal injury
resulting from failure to observe the electrical connection procedure.

OPERATING INSTRUCTIONS

― ―
Your Air Cooler
1. Remote control storage
2. Control panel
3. Air outlet
4. Castors
5. Handle
6. Dust filter
7. Water tank
8. Remote control
9. Ice Packs
+/ +/ _ _
Wheel Assembly
Prior to use, ensure that the wheels are affixed to the appliance for ease of manoeuvrability.
To affix the wheels to the appliance:
1. Lay the appliance sideways on a clean, flat, and stable surface.
2. Take one of the four provided wheels and insert the metal rod atop the wheel into one of the
four wheel locking points, applying force until the metal rod locks into position.
3. Repeat step 2 for the remaining three wheels.
4. Turn the appliance upright.
1
2
3
4
8 9
English | 9 of 48
5
6
7