User Servicing Instructions; Fcc Statement - ProBreeze PB-AC07-US Instruction Manual

3-in-1 evaporative air cooler
Table of Contents

Advertisement

Available languages

Available languages

Clean the exterior surface of the appliance by wiping
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
The filter should be cleaned every two weeks using a
damp cloth.
Always empty the water tank, clean and dry the
appliance when not in use to prevent mould.
Air Filter Cleaning:
To extend the lifespan of the filter, a vacuum cleaner,
using the brush attachment can be used to remove dust
from the surface of the filter.
Cleaning the water tank:
Remove and empty the water tank as per the instructions
above.
Clean the water tank with warm tap water and mild
detergent (e.g. washing up liquid). Note: Do not use
boiling water to clean the water tank.
Ensure to remove any scale or deposits that have formed
inside the water tank.
Wipe all surfaces dry before placing the water tank back
into the appliance.
Storage:
To store your product, we recommend using the original
or a similar-sized box.
Store the appliance in a safe, clean and dry place, away
from direct sunlight and out of reach of children when
not in use.
14 of 48 | English

USER SERVICING INSTRUCTIONS

― ―
Replaceable Fuse
1.
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling
on cord.
2.
Open fuse cover by using your thumb or a flathead screwdriver to slide open fuse access
cover on side of the plug.
3.
Remove fuse carefully by using a small screwdriver to pry the fuse out of the compartment
by the metal ends of the fuse.
4.
To avoid the risk of fire, replace fuse only with 2.5 Amp, 125 Volt fuse.
5.
Close fuse cover by sliding the fuse access cover back to the plug.
Caution: Do not attempt to replace the plug itself. Discard the product entirely if the plug itself is
damaged.
Fuse cover

FCC STATEMENT

― ―
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
Fuse
English | 15 of 48

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents