Advertisement
The SP10 Pro is a powerful EDC flashlight. It utilizes a powerful LH351D LED to provide a nice
beam for working, hiking and dog walking. SP10 Pro with Anduril 2.0 is powered by one 14500 or AA
battery. It will be your reliable companion for everyday use.
ANSI/NEMA FL1 Chart
Mode
14500
Lumino
AA / NiMH
us Flux
[lm]
14500
Runtim
AA / NiMH
e
[hrs]
14500
Beam
AA / NiMH
Distance
[m]
14500
Intensit
AA / NiMH
y [cd]
Impact Resistance
Water Resistance
Sofirn SP10 Pro
Manual
Thank you for purchasing this Sofirn product.
Contact us@sofirnlight.com if you need assistance.
Moon
1
1
122h
60h
-
-
-
-
Low
Medium
10
70
10
30
26h
9h46min
21h
13h12min
14
31
9
20
47
236
20
102
1 meter / 3.28
feet
IPX8, underwater (2 meter / 6.56 ft depth)
High
Turbo
280
900
130
350
2h22min
1h55min
1h48min
1h9min
63
119
42
77
983
3451
450
1491
Advertisement
Table of Contents
Related Manuals for Sofirn SP10 Pro
Summary of Contents for Sofirn SP10 Pro
- Page 1 The SP10 Pro is a powerful EDC flashlight. It utilizes a powerful LH351D LED to provide a nice beam for working, hiking and dog walking. SP10 Pro with Anduril 2.0 is powered by one 14500 or AA battery. It will be your reliable companion for everyday use.
- Page 2 The above mentioned parameters are based on tests according to international flashlight testing standards (ANSI/NEMA FL1) in our laboratory. Note Results may vary with different batteries or under different environmental conditions.
- Page 3 3.0V. It also turns off automatically if the voltage gets lower than 2.7V. Please recharge the battery. Advanced Temperature Regulation (ATR) technology: As the temperature rises, SP10 Pro is programmed to automatically step down and step up the brightness to prevent overheating.
- Page 4 Operation Instructions Quick Start After putting a battery in the light and tightening the parts together, the light should quickly blink once to confirm it has power and is now operational. After that, basic usage is simple: Click to turn the light on or another click to turn it off. - Hold the button to change brightness.
- Page 5 - 1H: Ramp up (or down, if button was released less than a second ago) - 2H: If light is on : ramp down If light is off: momentary high mode - 2C: Double click to go to / from highest safe level - 3C: Toggle between SMOOTH RAMPING and STEPPED RAMPING (while light is on) - 4C: Lockout mode.
- Page 6 Operating the flashlight for a long time in Turbo or High mode will warm it up. This is normal. SP10 Pro is intended to be used with an AA battery or a premium 14500 rechargeable battery. When installing the battery, make sure the anode (+) side always faces towards the head/LEDs.
- Page 7 Reason C: The flashlight will not turn on upon first use. Solution: Please do not forget to remove the insulation sticker from the battery on first use. If the above methods do not work please refer to the warranty policy before contacting your authorized distributor. Sofirn Limited: Tel: +86-755-23440047 Fax:...
Need help?
Do you have a question about the SP10 Pro and is the answer not in the manual?
Questions and answers