Using Channel Scan; Programming Favorite Channel Scan; Using Learning; Learning Precautions - One for All URC-10820 User Manual

OFA 10L with Learning Owners Manual.fm Page 12 Thursday, January 27, 2005 1:34 PM
O F A 10L U
NE OR LL NIVERSAL
4. Press and hold SET until the LED blinks
twice, then release SET. The macro is
now deleted but the keys (in the case of
POWER and device keys), will retain
their original function.

USING CHANNEL SCAN

In the TV, VCR, DVD, CBL and SAT modes, use
the FAV key to start a 3-second scan of all
favorite channels (if programmed,
"Programming Favorite Channel Scan" on
page 12) and/or all channels for the selected
mode.
1. Press TV, VCR, DVD, CBL or SAT once.
2. Press FAV once.
• If Favorite Channel Scan has been
set up, scanning of favorite
channels will start and cycle
through stored channels, then
proceed to the next channel up
and cycle through all channels on
the selected device.
• If Favorite Channel Scan has not
been set up, scanning will start
with the current channel, then
proceed to the next channel up
and cycle through all channels on
the selected device.
3. To stop scanning channels at any time,
press any key once.
PROGRAMMING FAVORITE
CHANNEL SCAN
In the TV, VCR, DVD, CBL and SAT modes, you
can store a list of up to 10 favorite channels,
in any order, that will be immediately
scanned when you press FAV (see "Using
Channel Scan" on page 12).
12 Using Channel Scan
R C L
EMOTE ONTROL WITH EARNING
NOTE: Only channels of one mode can be
stored for Favorite Channel Scan.
1. On the remote control, press TV, VCR,
DVD, CBL or SAT once.
Press and hold SET until the LED (red
2.
light) blinks twice, then release SET.
3. Enter 9 9 6. The LED will blink twice.
4. Use the keypad to enter a favorite
channel number (e.g., 031). Then press
SET once.
NOTE: If the original remote control required
pressing an ENTER key to change the channel,
also press the ENTER key after the channel
number (e.g., 0 3 1 ENTER).
5. If desired, repeat step 4 (in this
section) for each favorite channel to be
stored, up to a total of 10 channels.
NOTE: If you try entering more than 10
channels, the remote control will
automatically exit programming.
6. To exit programming, press and hold
SET for 3 seconds. The LED will blink
twice.

USING LEARNING

The One For All 10L Universal Remote
Control with Learning (URC-10820 B00)
includes a Learning feature so you can add
functions that are unique to your home
entertainment devices (e.g., DVD EJECT) on
the L1 ~ L3 keys. However, there are some
considerations.
L P
EARNING RECAUTIONS
• Your original remote controls must be
in working order for learning to work
properly.