Table of Contents
Advertisement
LCD DISPLAY
1. 15V/1A input
2. 5V/2.4A output
3. Light steady on
4. Light FLASH
5. 5V/2.4A output
6. Light SOS
7. Battery capacity
8. 12V output
9. 19V output
CHARGING THE LITHIUM ION POWERBANK
This product is partially charged from the manufacturer. Fully
charge the unit immediately after purchase. In order to prolong
the product life, be sure to fully recharge the unit after each
jumpstarting, or every 3 months even if this unit has not been used.
If battery voltage in the TECH-5000P Power Kit is too low, the
unit will shut off to prevent damage to itself. Recharge as soon as
possible to be activated and fully charge it to ensure long battery
life. In addition, it is not recommended to charge and discharge
(use) the Power Bank at the same time.
CHARGING OPTION 1:
Plug one end of the wall charger cord into the 15V/1A Input
port of the Lithium Ion Powerbank and plug the other end of
the wall charger cord into a standard wall outlet. (See detailed
diagram on the following page.)
TECH-5000P
1 2 3 4
7
8
9
USER'S MANUAL PAGE 7
5 6
Advertisement
Table of Contents
Need help?
Do you have a question about the TECH-5000P and is the answer not in the manual?
Questions and answers