Honeywell Gamewell-FCI MS-95 Manual page 11

L-Series, Indoor Strobes and Horn Strobes
Indoor Selectable-Output Strobes/Horn Strobes for Ceiling Applications
General
The L-Series audible visible notification products offer the most versatile and easy-to-
use product line of horns, strobes, and horn strobes in the industry. This product
includes lower current draws and a modern aesthetic design which reduce installation
times and maximize profits. In addition, the L-Series offers white and red plastic
housings and wall and ceiling mounting options.
Similar to the entire L-Series product line, the ceiling-mount strobes and horn strobes
include a variety of features that increase their application versatility while simplifying
the installation. All devices offer a plug-in design so that there is minimal intrusion
into the backbox. These features make installations fast and foolproof while
eliminating costly and time-consuming ground faults.
To simplify the installation, the L-Series uses a universal mounting plate allowing you
to mount the devices to a wide array of backboxes. With an on-board shorting spring,
Installers can test wiring continuity before the device is installed.
Installers can also easily adapt devices to suit a wide range of application
requirements using the following:
• Field-selectable candela settings
• Automatic selection of 12- or 24-volt operation
• Rotary switch for horn tones with two volume selections
FEATURES & BENEFITS
• Listed for ceiling • Uses field-selectable
mounting only candela settings on the
following ceiling units:
• Features a plug-in
design so that there is - 15
minimal intrusion into
- 30
the backbox
- 75
- 95
• Designed with a
tamper-resistant
- 115
construction
- 150
- 177
• Provides an automatic
selection of 12- or 24-
volt operation at 15
and 30 candela
Notification Appliances
• Produces horn rated at
88+ dBA at 16 volts
• Offers a rotary switch
for horn tone and two
volume selections
• Includes a universal
mounting plate for
ceiling units
Ceiling Horn Strobe
• Contains a mounting • Supports electrical
plate with a shorting compatibility with the
spring feature that legacy SpectrAlert and
checks the wiring the SpectrAlert
continuity before Advance devices
device installation
• Compatible with MDL3
sync module