HP MSM317 Installation And Configuration Manual page 41

Key configuration settings for the VSC are as follows:
User A
Wired guests, as illustrated by user A, connect to Port 2, which is bound to the VSC named Guest.
Authentication occurs via HTML, using the local user accounts on the controller. Once authenticated,
user A gains access to resources on the private network according to the configuration of the public
access interface feature on the controller. Since the Guest VSC is not the default VSC, a VLAN
definition must be assigned to the port to ensure that user traffic is properly routed from the access
device to the VSC on the controller.
Key configuration settings for Port 2 are as follows:
Configuration of the VLAN on the controller is done by defining a network profile with VLAN 10
and binding it to the LAN port on the controller. Define the new network profile on the Controller
>> Network > Network profiles page and assign VLAN 10 to it.
Map the new network profile to the LAN port using the Controller >> Network > VLANs page.
Configuring the switch ports 41