HP MSM317 Installation And Configuration Manual page 33

tr
2
P o r t
A
U s e r
User A
MSM317
Notebook
Untagged
Port 2
-Wired
-Primary VLAN=Untagged
-Allow dynamic VLAN=On
-Authentication=802.1X
Management
-Default settings
In this scenario, Port 2 is bound to a non-access-controlled VSC named Guest. This VSC is configured
to provide 802.1X authentication with the login credentials for user A validated against the local
user list stored on the controller.
A local account is created for user A with an egress VLAN ID of 30. Once user A is authenticated,
the user's traffic is sent on VLAN 30.
Example 3. When binding to an access-controlled VSC
If deploying this example using an MSM720, the switch is connected to the MSM720 via port
1,2,3, or 4 and the MSM720 is connected to the private network via port 5 or 6. Also, any use
of VLAN 10 should be replaced with VLAN 1 1.
On all other controllers, the switch is connected to the controller via the LAN port, and the controller
is connected to the private network via the Internet port.
t
k P o r
U p l i n
h
S w i t c
P o E
w i t h
U S
R A D I
r
S e r v e
Private network
User gains access to
VLAN=30
resources on the private
network.
Untagged
MSM7xx Controller
Untagged
VSCs are not used.
Management
-Default settings
7 x x
M S M
r o l l e r
C o n t
t e
P r i v a
o r k
N e t w
RADIUS server
Account: User A
-VLAN ID=30
Configuring the switch ports 33