Prepping the Cabinet Continued
Step 2
•
Installer should examine all parts that are not intended to be replaced by the retrofit kit for damage and
replace any damaged parts prior to installation of the retrofit kit.
•
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
•
Any existing holes in the cabinet that will not be used in the installation of product should be patched to
avoid water damage.
•
Openings smaller than ½" diameter may be sealed with the appropriate amount of rated caulk or sealant.
Openings larger than ½" should be patched using an aluminum or zinc coated steel patch with rivets and sealant.
Step 3
Proceed with the PhoenixNRG Streamliner installation guidelines.
PHOENIXNRG STREAMLINER DIMENSIONS
Your PhoenixNRG Streamliner is ready to come out of the package!
•
Simply disconnect and remove the fluorescent lamp ballast.
•
Inspect sockets for damage (replace sockets if necessary).
•
Reconnect sockets to primary power
•
Pop Streamliners into sockets.
NO PEELING AND STICKING OF MODULES REQUIRED AND NO EXTERNAL POWER SUPPLY NEEDED!
hanleyledsolutions.com | 800.542.9941
PHOENIXNRG STREAMLINER INSTALLATION GUIDE
Grimco, Inc. v. Principal Lighting Group, LLC
PLG Exhibit 2053
5
IPR2021-00968
Page 4