Advertisement
RETROFIT INSTALLATION GUIDE
PhoenixNRG Streamliner
This guide is designed to aid in the installation of HanleyLED's PhoenixNRG Streamliner. Skilled trades people
that are familiar with general construction, electrical, and sign installation techniques should do the installation.
Licensed electricians should provide all installation and hook-up of components. All installation and hook-up
should be done in accordance with all National and Local codes and permits. In no way is this document intended
to construe warranty or fitness of use of the products described, nor is it intended to provide safety instruction for
those installing the product.
THE FIELD INSTALLATION OF THIS RETROFIT SYSTEM INTO A SIGN IS SUBJECT TO THE
CAUTION:
TURN OFF POWER TO THE SIGN BEFORE INSPECTING OR REMOVING EXISTING LIGHT
SOURCE. THE POWER MUST REMAIN OFF WHILE INSTALLING THE LED RETROFIT KIT.
Tools Required:
•
Wire cutter & strippers
•
Measuring tape
•
Marking pens
•
Drill
•
Standard hardware and supplies in addition to the HanleyLED Streamliner installation guides
(UL listing may be required on certain items).
Prepping the Cabinet
Step 1
•
Remove existing neon or fluorescent bulbs by having a licensed electrician disconnect and remove the neon
transformers or fluorescent ballasts.
•
Remove existing neon and standoffs or fluorescent lamps.
•
Inspect all sockets for signs of damage.
•
Replace any damaged sockets. Reconnect socket wires directly to primary power.
•
Attach surge protector at this junction of socket wires and primary wire.
NOTE:
Power to the sign should still be off at this stage.
ALL MATERIALS REMOVED MUST BE DISPOSED OF IN ACCORDANCE WITH
hanleyledsolutions.com | 800.542.9941
ACCEPTANCE OF LOCAL INSPECTION AUTHORITY.
APPLICABLE LOCAL, STATE AND FEDERAL LAWS.
PHOENIXNRG STREAMLINER INSTALLATION GUIDE
Grimco, Inc. v. Principal Lighting Group, LLC
PLG Exhibit 2053
4
IPR2021-00968
Page 3
Advertisement
