INSTALLING THE VEHICLE
IDENTIFICATION CARD
Install any devices that use radio frequency
identification, for example, toll readers or
vehicle identification cards, to the specified
area on the windshield.
Note: Follow the manufacturer's installation
instructions.
Item
A
B
Vehicle Identification
Note: When installing the radio frequency
identification device, do not block objects
such as the rain sensor and the
auto-dimming sensor.
Dimension Description
The top edge of the windshield to the top
edge of the identification card.
The center of the windshield to the right edge
of the identification card.
489
E291100
Dimension
No less than 1.6 in (40 mm).
No more than 3.9 in (100 mm).