Table of Contents
Advertisement
HCD-LX20i
Playing the iPod
1
Select the iPod function.
Press FUNCTION +/
2
Place the iPod.
3
Start playback.
Press (or on the unit)
To control the iPod
You can control your iPod with the following buttons on
the remote or unit.
To
Pause playback
Scroll up/down the
iPod menus
Select a track
or chapter of
audiobook/podcast
Choose the selected
item
Find a point in a
track or chapter of
audiobook/podcast
Return to the
previous menu or
select a menu
To use the system as a battery charger
You can use the system as a battery charger for the iPod
when the system is on.
The charging begins when the iPod is placed on the
unit's connector. The charging status appears in the iPod
display. For details, see the user's guide of your iPod.
To stop charging the iPod
Remove the iPod.
Notes
When placing or removing the iPod, handle the iPod in the same
angle as that of the iPod connector on the unit and do not twist or
sway the iPod to prevent connector damage.
Do not carry the unit with an iPod set on the connector. Doing so
may cause a malfunction.
When placing or removing the iPod, brace the unit with one hand
and take care not to press the controls of the iPod by mistake.
Before disconnecting the iPod, pause playback.
To change the volume level, use VOLUME +/
does not change even if adjusted on the iPod.
This system is designed for iPod only. You cannot connect any other
portable audio players.
To use an iPod, refer to the user's guide of your iPod.
Sony cannot accept responsibility in the event that data recorded to
iPod is lost or damaged when using an iPod with this system.
Creating your own program
(Program Play)
Use buttons on the remote to create your own program.
1
Select the CD function.
Press FUNCTION +/
2
Select the play mode.
Press PLAY MODE
appears while the player is stopped.
3
Select the desired track or file number.
Press /
or file number appears.
When programming MP3 files, press
repeatedly to select the desired folder, and then select
the desired file.
Selected track or file number
4
Program the selected track or file.
Press
to enter the selected track or file.
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 25 tracks or files.
To play your program of tracks or files, press
6
The program remains available until you remove the
disc. To play the same program again, select the CD
function, and then press
6
To cancel Program Play
Press PLAY MODE
disappears while the player is stopped.
To delete the last track or file of the program
repeatedly.
Press CLEAR
To view program information, such as total
track number of the program
Press DISPLAY
Using optional audio components
1
Prepare the sound source.
Connect additional audio component to the AUDIO
IN jack
(not supplied).
.
2
Turn down the volume.
Press VOLUME
3
Select the AUDIO IN function.
Press FUNCTION +/
Press
4
Start playback.
(pause) (or (play/pause)
or (stop)
on the unit)
.
Start playback of the connected component and adjust
its volume.
/
. You can scroll up or
down the iPod menus much like
5
Adjust the volume.
the Click Wheel operations of
Press VOLUME +/
the iPod or the drag up-or-down
operations of the iPod touch.
/ (go back/go forward)
Adjusting the sound
. To fast-forward or fast-
rewind, hold down the button.
To
/
(enter) (or ENTER on
Generate a more dynamic
the unit)
. You can choose the
sound (Dynamic Sound
selected item much like the center
Generator X-tra)
button on the iPod or the touch
Set the sound effect
operation of the iPod touch.
Hold down / (rewind/
fast forward)
during playback,
and release the button at the
Changing the display
desired point.
/TOOL MENU
/
To
(return)
. You can return to the
previous menu or select a menu
Change
much like the Menu button on
information on the
the iPod or the touch operation
1)
display
of the iPod touch.
Check the clock
when the system
is off.
1)
For example, you can view CD/MP3 disc information, such as;
track or file number during normal play.
track or file name ("
artist name (" ") during normal play.
album or folder name ("
total playing time while the player is stopped.
volume label if it exists on the disc.
The STANDBY indicator on the unit lights up when the system is
2)
off.
Notes on the display information
Characters that cannot be displayed appear as "_".
The following are not displayed;
total playing time for an MP3 disc.
remaining playing time for an MP3 file.
The following are not displayed correctly;
elapsed playing time of an MP3 file encoded using VBR (variable
bit rate).
. The volume level
folder and file names that do not follow either the ISO9660
Level 1, Level 2 or Joliet in the expansion format.
The following are displayed;
total playing time for a CD-DA disc during normal play.
remaining playing time for a track.
remaining playing time of a current CD-DA disc during normal
play.
ID3 tag information for MP3 files when ID3 version 1 and
version 2 tags are used (ID3 version 2 tag information display has
priority when both ID3 version 1 and version 2 tags are used for a
single MP3 file).
up to 15 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (" $ % ' ( ) * + , – . / < = >
@ [ \ ] _ ` { | } ! ? ^).
repeatedly.
repeatedly until "PGM"
repeatedly until the desired track
+/
Total playing time of the
selected track or file
.
.
Using the timers
repeatedly until "PGM"
The system offers two timer functions. If you use both
timers, the Sleep Timer has priority.
while the player is stopped.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP
repeatedly.
system automatically turns off after the current disc stops
or in 100 minutes.
Play Timer:
You can wake up to CD, tuner or iPod at a preset time.
Make sure you have set the clock.
Use buttons on the remote to use the Play Timer
functions.
on the unit using an audio analog cord
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/
.
To start from a specific CD track or audio file, create
your own program.
repeatedly.
2
Select the timer set mode.
Press TIMER MENU
3
Set the play timer.
Press /
press
.
"ON TIME" appears, and the hour indication flashes.
4
Set the time to start playback.
Press /
The minute indication flashes. Use the procedure
Press
above to set the minutes. "OFF TIME" appears and the
DSGX
on the unit.
hour indication flashes in the display.
5
Use the same procedure as in step 4 to set the time
to stop playback.
EQ
.
6
Select the sound source.
Press /
source appears, then press
the timer settings.
7
Turn off the system.
Press
Press
DISPLAY
repeatedly when the
the preset time.
system is on.
If the system is on at the preset time, the Play Timer
will not play. Do not operate the system from the time
DISPLAY
when the system is
the system turns on until the playback starts.
off
2)
. The clock is displayed for 8
To check the setting
seconds.
1
Press TIMER MENU
"SELECT" flashes in the display.
") during normal play.
2
Press
") during normal play.
3
Press /
press
To cancel the timer
Repeat the same procedure as above until "OFF" appears
in step 3, and then press
To change the setting
Start over from step 1.
Notes for the iPod user
Make sure the iPod is not playing when using the Play Timer.
The Play Timer may not be activated depending on the status of the
connected iPod.
Tip
The Play Timer setting remains as long as the setting is not cancelled
manually.
repeatedly. If you select "AUTO, " the
to adjust the volume.
.
repeatedly to select "PLAY SET, " then
.
repeatedly to set the hour, then press
.
repeatedly until the desired sound
. The display shows
. The system turns on 15 seconds before
.
.
repeatedly to select "PLAY SEL," then
.
.
Advertisement
Table of Contents
