JVC TIME SCAN HR-DD445EK Instructions Manual page 43

M EN U
O K
N O TES:
● J ust Clock (when set to "ON") adjusts the recorder's built-in
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
● J ust Clock is not effective when . . .
– the recorder's power is on (unless the recorder is tuned to
the same preset selected in the Clock Set screen).
– the recorder is in the Timer mode.
– a difference of more than 3 minutes exists between the
built-in clock's time and the actual time.
● If J ust Clock is set to "ON", the recorder's clock is automati-
cally adjusted at the start/end of Summer Time.
● Auto clock setting and J ust Clock may not function properly
depending on the reception condition.
● During Manual clock setting, if the day and month data are
invalid (such as 31st April), the month digits are cleared
automatically and the day digits begin blinking. Input the
correct data.
● If, in step 4 of the Manual clock setting procedure, the year
digits are automatically cleared and the day digits begin
blinking, it is possible that you have input 29th February for a
non-leap year. Input the correct data.
Downloaded from: https://www.usersmanualguide.com/
1 2 3
4 5 6
8
7 9
/
0
4
2
1 3 ¡
¶ 7 8
1
4 ¢
3
Auto Clock Set
SET CLO CK
AUTO MATICALLY
4
At the Clock Set screen,
press PU SH JO G
Auto Clock Set screen
appears and clock setting
begins.
● If "TV PR." isn't set to the
preset position on which
Auto Clock Set data is
received, "ERROR"
appears, and then the screen from step 3 reappears.
To set "TV PR.", press O K to place the cursor next to
it, then cycle through the numbers by pressing PU SH
JO G
which the station transmitting clock setting data
(BBC1, BBC2, etc.) is stored appears.
RETURN TO N O RMAL
SCREEN
PU SH JO G
5
Once clock setting is completed, press M EN U to return
to the normal screen.
M a nua l Clock Set
SET DATE AN D TIME
4
Press PU SH JO G %fi to set the hour, then press O K .
The " minutes" display begins blinking. Repeat the
procedure to set the minutes, day, month and year.
SET JUST CLO CK
5
The default setting is " ON" . Set as desired by pressing
PU SH JO G
● If you set to " OFF" , you can disregard the next step as
you won't be able to receive regular clock adjust-
ments.
SET CLO CK DAT A SO URCE
PRESET
6
The recorder is preset to receive clock setting and
adjustment data from preset position 1. Press PU SH
JO G
representing the station transmitting clock setting data
(BBC1, BBC2, etc.), then press O K .
ST ART CLO CK O PERATIO N
7
Press M EN U .
. The
%fi until the number representing the position in
%fi , then press O K .
%fi to set the preset position to the number
43
AUTO CLOCK
PLEASE WAIT
JUST CLOCK: ON
TV PR. : 1