Table of Contents
Advertisement
26
PRO G CH ECK
START+/ –
O K
Downloaded from:
https://www.usersmanualguide.com/
1
2
3
4
5
6
8
7
9
/
CAN CEL
0
4
2
TV PRO G+/ –
1
3
¡
¶
7
8
1
4
¢
3
TIM ER RECO RD IN G(cont.)
Check And Ca ncel
Progra mmes
ACCESS PRO GRAMME
DISPLAY AN D/ O R SCREEN
1
Press PRO G CH ECK.
● The display panel shows the programme start time.
Pressing O K changes the display to the programme
stop time, then the date and preset position.
● If the recorder is turned on and the TV is set to its
VIDEO channel or AV mode, you can check
programme information on screen as well.
● Each time you press
programme's information appears.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2 .
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CAN CEL .
All information you input is deleted.
REVISE PRO GRAMME
IN FO RMATIO N
2
Input the appropriate data using the START +/ –, STO P
+/ –, D ATE +/ – and TV PRO G +/ – buttons on the
remote control.
Timer W a rning
If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning appears on
screen to tell you that the recording
is to start in 5 minutes.
N O TES:
● The warning only appears if
you're not in the Timer mode at that time.
● If this recorder is being used as the player for tape dubbing,
the warning screen is recorded on the tape in the other video
recorder.
The warning blinks for the entire 5 minutes leading up to the
start of timer recording. To clear the display, press CAN CEL .
PRO G CH ECK , the next
– WARNING–
TIMER RECORDING
TO START SOON
[CANCEL]
Advertisement
Table of Contents
