Advertisement
Assembly Steps(EN) / Montageschritte(DE)
STEP 19
WALL
O
M
C
C x 2PCS
M x 2PCS
O x 2PCS
STEP 20
Afer that, move the cabinet to the corresponding position, then use
the part "N" to pass through the part "M", and tighten it. The installation
of the anti-falling device is completed.
WALL
N
N
x 2PCS
After installation, move the cabinet to the position you need, and drill 2
holes on the wall at the corresponding position according to the height
and position of the anti-falling device. Firstly, put the plastic screws "O"
into 2 holes separately, and then use the "C" screws to lock the Parts "M"
with the plastic screws "O" separately.
O
M
C
N
- 14 -
O
O
N
N
N
M
C
Advertisement
