Table of Contents
Advertisement
Installation Information
INSTALLATION CONSIDERATIONS
This section covers common installation issues seen by Service Technicians. Improper installation, though not a
valid service issue, has the potential to lead to a call for service.
NOTE:
If additional information is needed, refer to the complete Installation Guide.
• IF UNIT IS UNDER A SOLID SOFFIT AND CLEARANCE BETWEEN TOP OF UNIT AND SOFFIT IS
GREATER THEN 25 mm, OR IF SOFFIT IS NOT SOLID, UNIT COULD TIP FORWARD UNDER CERTAIN
LOAD CONDITIONS. FAILURE TO INSTALL ANTI-TIP COMPONENTS AND EXTEND LEVELERS TO
FLOOR ACCORDING TO INSTALLATION MANUAL COULD RESULT IN SERIOUS INJURY OR DEATH.
• MAKE SURE THERE ARE NO ELECTRICAL WIRES OR PLUMBING THAT THE SCREWS CAN COME INTO
CONTACT WITH.
• Always wear safety glasses and other necessary protective devices or apparel when installing or work-
ing with anchors.
• Not recommended for use in light-weight masonry material such as block or brick. Use of core drills not
recommended to drill holes for this anchor. Not recommended for use in new concrete which has not
had sufficient time to cure.
#7004858 - Revision A - April, 2007
International Pro-Series
International Pro-Series
(ICB648PRO)
(ICB648PRO)
2-6
Advertisement
Table of Contents
