Advertisement
5. ASSEMBLY
5.1.
ATTACH THE MIDDLE EXTENSION LANCE TO WAND FIGS 1 & 2
Note: When attaching, align the two projections on the lance with the grooves on the wand.
5.2.
Attach the adjustable nozzle to the middle extension lance. Note: When attaching, align the projection on the front lance with the
groove on the middle extension lance with the button held.
fig.1
5.3.
MOUNTING THE HANDLE AND HOSE HOOK FIG.3
5.3.1.
Screw the handle (17) tight to the main unit (2 screws) and screw the hose hook (18) tight to handle (4 screws) . The screws will be
packed together with the manual.
5.4.
MOUNTING THE HIGH PRESSURE HOSE HOOK FIG.4
5.4.1.
Screw high pressure hose hook (8) onto the main unit (2 screws) . The screws will be packed together with the manual.
Note: All screws are packed in one bag.
5.5.
FIT GUN HOLDER AND POWER CABLE HOOK FIG.5
fig.6
5.6.
ATTACH & DETACH THE HIGH PRESSURE HOSE FIG.6
5.6.1.
Attach one end of the high pressure hose (19) to the pressure water outlet of the machine and the other end of the high pressure hose
to the wand.
Note: After the high pressure hose is connected, check the connection by gently pulling on the hose to ensure it stays connected.
Detach the high pressure hose: Turn switch to "OFF/II" position. Pull trigger to drain water from wand, push the lock button
5.6.2.
and pull.
© Jack Sealey Limited
fig.2
fig.3
Slide button to remove hose
Original Language Version
fig.4
fig.7
PW1860
fig.5
Issue 1
17/11/2022
Advertisement
