Transport Protection For The Door; Trim Kit; Placing The Dishwasher - Asko DBI776IXXL.S.SOF.U User Manual

Hide thumbs Also See for DBI776IXXL.S.SOF.U:
Table of Contents

Advertisement

Installation instructions

Transport protection for the door

Do not forget to remove the transport protection for the door when unpacking the dishwasher.

Trim kit

The dishwasher is equipped with a trim kit to fit the 24'' (609 mm) cutout standard. If a European
width of 23 5/8'' (600 mm) is required, remove the trim kit.
Adjust the trim kit
The trim kit can be adjusted backward to level the dishwasher tub.

Placing the dishwasher

The dishwasher is intended to be built in under a countertop. The built-in measurements are shown
in the illustration. Make sure that the cord and hose hole's edges are even and will not damage the
drain and inlet hoses or the power cord.
The electrical and
water supplies should
enter through the area
indicated by the
shading on the
illustration.
* <
34.5'' (877 mm):
Remove the trim kit.
50
Inches (mm)

Advertisement

Table of Contents
loading

Table of Contents