Microsensor MPM436W Operation Manual page 8

5 Attentions
a) Before using the transmitter. Please firstly read this operating manual
and do the connections accordingly.
b) Be sure power supply is within the permitted range before giving
power.
c) Do not pull the cable strongly.
d) The housing shall be grounded to avoid strong interference.
e) It is recommend to install a lightning-protection device.
f) The sensor diaphragm is extremely delicate, it must never be touched
as this can destroy the element.
6 Troubles & Solutions
In case the transmitter is in any abnormal operation, please cut off the
transmitter immediately and check as follows:
6.1 Failure: No signal output with power supply
Possible solve steps:
a) If power supply is in range: 15V~28VDC.
Figure8
7