Mitsubishi Heavy Industries Smart M-Air Setup Quick Manual page 8

When configuring the wireless LAN settings, turn off the air conditioner.
On your smartphone, open a communication between the
B-1
interface and your smartphone.
Back side
Front side
← Running LED
1 →
2 →
Smartphone
Wireless LAN
interface
Register the air conditioner in the application and
B-2
complete the connection procedure.
1
2 Air Conditioner List
2
4 Wireless LAN Settings
4
5 →
6 Air Conditioner List
Precautions concerning connecting to the router
* If you fail to connect even after confirming the screen again, the number of
devices connected with the wireless LAN router may have reached its upper limit,
or the router may not be operating or may have failed.
Therefore, check the wireless LAN router according to the user's manual of the
router.
* If the Internet line is disconnected, contact your Internet provider for confirmation.
* Configure wireless LAN settings while the air conditioner is turned off.
If you do not know
(Use the AP function of the router)
SSID and KEY

shown on the back side of the wireless
LAN interface
They are used to enter this information into
your smartphone in step 4 .
On the Wireless LAN Interface:

1 Hold down the Power button for 2 or more seconds.
The Running LED (green) lights up.
2 Hold down the Settings button for 2 or more
seconds.
2
The Running LED (green) blinks. (Lights up
for 2 seconds and turns off for 0.5 seconds.)
On your Smartphone:

3 Open the "Wi-Fi" or "Connection" screen
from "Settings".
4 Tap the network name that matches the
"SSID" of the wireless LAN interface you
confirmed, and enter "KEY" for the password.
5 Connect the smartphone to the wireless LAN
interface.
Connected
1 Launch the "Smart M-Air" application on your
smartphone.
2 Tap the [Find unregistered Air Conditioners]
button on the "Air Conditioner List" screen.
Tap the [Setting] button from "Unregistered
3
Air Conditioner".
3 Unregistered Air Conditioner
4 Tap [SSID] of the wireless LAN router you are
using, and enter the password. Tap the [
mark in the upper right corner to complete the air
conditioner registration procedure.
5 W h e n t h e c o n n e c t i o n i s c o m p l e t e , t h e
Communication LED of the wireless LAN
interface lights up orange for 2 seconds.
6 The air conditioner information is acquired.
Confirm that the air conditioner runs or stops
when you tap the [ON] or [OFF] button, and
complete the connection procedure.
6
Room air conditioner
are
XXXX
Hold down for more than
(Example)
 Wireless LAN router you are using
 SSID
 KEY
(password)
If the "SSID" of the router is not
displayed in the list on the "Wireless
LAN Settings" screen, enter the
"SSID" name directly.
Connection
completed
required.
←
MADE IN CHINA
2 2 2 seconds seconds seconds
XXXX
Smartphone
3
Smartphone
]