Using The Flash - Epson PhotoPC 3000Z User Manual

3
Press the button under
setting to Image Tiff . (Press the same button to
change the setting back.) You see a message warning you
to use a card with at least 9.1MB of free space.
4
Press the button under BACK to return to the SETUP
menu.
NOTE
To capture Tiff photos, make sure the image quality is set
.
to
You will notice a delay of approximately 32 seconds while
the camera processes your image in Tiff mode. You will also
notice a delay when playing back Tiff photos.
If you want to take multiple shots in Uncompressed Tiff
mode, you can buy a higher-density CompactFlash memory
card, which lets you store more photos. See Appendix B for
details. (You can still store several JPEG images with a
picture in Tiff mode.)
Taking Pictures
Image JPEG to change the

Using the Flash

Press the flash button to cycle through the five flash settings.
flash
button
Your camera has a hot shoe to attach an optional external
flash. See Appendix B for more information on purchasing
and attaching an external flash.
NOTE
The camera dial must be turned to
flash setting. You can't use the flash in continuous shooting or
video clip capture mode.
After you take a picture with the flash, the flash icon blinks
until it is fully recharged. Your flash setting remains in effect
even after you turn off the camera.
, , or to change the
2-11