Epson PhotoPC 3000Z User Manual page 149

3
Start Image Expert, then select Properties from the
Camera menu. The Camera Properties menu appears:
NOTE
If you see an error message, check for possible solutions on
page A-9.
Enter a new Description of the camera to change
the default. This might be useful if you have more
than one camera and you want to record its
description in your picture data.
Operating the Camera From Your Computer
Type in the Camera Time box to change the time
and date. Or, click Set Camera to Computer
Time to automatically synchronize your camera to
your computer.
4
Click OK to save your settings and exit the Camera
Properties dialog box.
5
If you want to adjust your port settings, select
Connection from the Camera menu. You see the
Connection dialog box:
Select another port if you want to change your
connection. In most cases, it's best to leave the Port
setting at Auto because Image Expert can detect the
camera connection automatically.
13-6