Table of Contents
Advertisement
22 October 2019
Fig.2
5) Mount transmission cooler to
bracket (fan side up) with 1/4"
supplied hardware.
6) Mark and drill four 19/64" holes into
frame for self-threading bolts to
mount cooler assembly.
7) Mount cooler assembly to frame rail
using supplied self-threading bolts
and secure with supplied nuts and
washers.
8) Apply small amount of pipe sealant
to temp switch thread and thread
into JIC adaptor until snug.
9) Thread JIC 90deg fittings onto
cooler hand tight. Large sweep tube
fitting connects to outlet.
U.S. Shipping Address: 1124 Fir Avenue, Blaine, WA 98230
1030606 Transmission Cooler Instruction Manual (I-00213)
BD Engine Brake Inc.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bddiesel.com
FAN
COOLER
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
Mount cooler along
frame rail or cross
member, away from
rotating pieces or any
heat source.
L BRACKET
6
Advertisement
Table of Contents
