Yealink T46G Quick Start Manual

T46G Business Phone
Placing a Call
You can place a call in three ways using your SIP-T46G IP
phone:
* Using the handset
* Using the speakerphone
* Using the headset
To place a call using the handset:
1. Pick up the handset.
2. Enter the extension # using the keypad or
3. Press 9 + number first to dial outside line
4. Press ,
To place a call using the hands-free speakerphone mode:
With the handset on-hook, press
tone. Enter the desired number using the keypad.
Press , or the
Answering a call
Use the handset
Use the speakerphone
Use headset
Answering while on another call
If you have an active call, and an incoming call arrives on the phone,
do one of the following:
* Press the Answer soft key.
The incoming call is answered and the original call is placed on hold.
* Press to access new call
* Press or the Answer soft key
Hood River County School District T46G Basic Phone User Guide
or the soft key.
or the line key to obtain a dial
soft key.
Call Hold/Resume
1. Press or the Hold soft key during a call. The LCD
screen indicates that the call is on hold.
The LCD Key flashes green
Multiple Calls on Hold:
If multiple calls are placed on hold, do one of the following:
- Press or to switch between the calls, and then press the
Resume soft key to retrieve the desired call.
Page 1