5-2-18 Broadcom BCM7416 NetXtreme-E 10GBASE-T Network Connection
Parameter
Firmware Image Menu
Device Configuration Menu
Description
Press [Enter] to view firmware image information.
Press [Enter] to configure advanced items.
Multi-Function Mode
– Configures the NIC Hardware Mode.
– Options available: SF, NPAR 1.0. Default setting is SF.
SR-IOV
– Enable/Disable Single Root I/O Virtualization.
– Options available: Disabled, Enabled. Default setting is Disabled.
Number of MSI-X Vectors per VF
– Configures the number of MSI-X Vectors per VF (0-128).
– Default setting is 16.
Maximum Number of PF MSI-X Vectors
– Configures the maximum number of PF MSI-X Vectors (0-512 per
controller).
– Default setting is 74.
Energy Efficient Ethernet
– Enable/Disable Energy Efficient Ethernet operation.
– Options available: Disabled, Enabled. Default setting is Disabled.
Operational Link Speed
– Configures the link speed setting to be used as the default link speed
for the selected port.
– Options available: AutoNeg. Default setting is AutoNeg.
BIOS Setup
- 77 -