Table of Contents
Advertisement
3-9
Installing the M.2 Device and Heat Sink
CAUTION
The position of the stand-off screw will depend on the size of the M.2 device. The stand-off screw
is pre-installed for 22110 cards as standard. Refer to the size of the M.2 device and change the
position of the stand-off screw accordingly.
Follow these instructions to install the M.2 device:
1.
Insert the M.2 SSD module into the slot.
2.
Secure it with the screw, tightening as necessary to fasten the M.2 SSD module in place.
1
2
System Hardware Installation
- 36 -
Advertisement
Table of Contents
