Gigabyte R133-C11-AAB1 User Manual page 31

4
7
• Lock the CPU by using a Torx T20 screwdriver to tighten screw.
• When installing the heatsink to CPU, use a Torx T20 screwdriver to tighten 4 captive nuts in
sequence as 1-4.
• The screw tightening torque: 13.5 ± 0.5 kgf-cm.
• To ensure the system operates properly, make sure the heatsink is seated on the processor
firmly.
5
System Hardware Installation
- 31 -
6
2
4
3
1
4