Steps
1. Align the screw hole on the solid-state drive bracket with the screw hole on the palm-rest and keyboard assembly.
2. Replace the screw (M2x4) that secures the solid-state drive bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the
2230 solid-state drive
2. Install the
base
cover.
3. Follow the procedure in
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The following image(s) indicate the location of the touchpad and provides a visual representation of the removal procedure.
36
or
2280 solid-state
After working inside your
Before working inside your
drive, as applicable.
computer.
computer.