Problem Solving; What To Do When The Lights Come On Or Flash - Epson PowerLite Pro Cinema 7100 User Manual

Problem Solving

This section explains how to interpret the projector's status lights, solve problems with the
picture and remote control, and contact technical support.
What To Do When the Lights Come On
or Flash
The lights on top of the projector indicate the projector's
status and let you know when a problem occurs.
If the projector isn't working correctly, first press the
P power button, let the projector cool down, turn off the
power switch on the back, and unplug the power cord.
Then plug the power cord back in and turn on the
projector. If this doesn't solve the problem, check the
status lights on top of the projector.
Lights indicating normal operation
Light state
All lights are off
Power icon is on
Power button
flashes and
icon is on
Power icon and
are on
Power button
flashes; no other
lights are on
Cause and solution
The projector is turned off. If necessary, connect the power cord
and turn on the power switch on the back of the projector.
The projector is in standby mode. Turn off the power switch in
back to turn off the projector, or press the
it on.
The projector is warming up. Wait for the picture to appear.
icon Projection is in progress.
The projector is cooling down. Wait until the light stops flashing
and remains on. Then turn off the power switch in back to turn off
the projector, or press the
Operation
indicator
lights
Warning lights
P
power button to turn
P power button to turn it back on.
55
Problem Solving