Advertisement
Room Wizard
Features
The RoomWizard can be use either as a wireless unit or can be used with wire to create a specific
boundary. Consult your local Pet Stop dealer for suggestions on how best to used the RoomWizard.
Digital Range Display readouts display
the current signal field range setting.
Power On/Off and Range Adjustment
Buttons. If the Range Display is not lit,
pressing the upper ("+") button will turn
the transmitter on. Pressing both
buttons ("+" and "-") at the same time
will turn the transmitter off.
Pressing the upper ("+") button will
increase the signal field emanating
from the unit or wire if used. This will
effectively increase signal around
the unit or on both sides of the wire
if in a wired configuration. Pressing
the lower ("-") button will decrease
Pet Stop | Owner's Guide
AC Adapter Power
Connector. Plug in the AC
adapter that came with
the unit, into the "Power"
connector on the left.
this area.
Only use an approved
PET STOP® AC adapter.
Wired Mode Adapter Cord
Connector. When using
the transmitter with
boundary wire, plug in the
Wired Mode adapter cord
at the right connector
labeled "Loop".
10
Advertisement
