Advertisement
The Menu of Settings
The OT-300 includes a menu of settings to program each receiver that include:
• Signal Field Width – variable settings from 0 to 32 feet
• Receiver Sensitivity – used to help match receivers to a boundary
• Frequency (10) – four settings to help avoid interference from
neighboring systems or ground loops
• Warning time (20) – four settings to fix the time prior to the correction
• Correction Modes (30) – choose from four standard levels or three
progressive levels to customize a correction that is right for each pet
• Duration (40) – (for progressive correction levels) – four settings to
adjust the time between progressing corrections
• Power Cycling (50) – two settings
• Modulation Frequency (60) – six different frequencies to mimic
competing pet containment systems
• Stopper Mode (70) – four settings to adjust the amount of time before
correction stops
• GentelSteps™ (80) – nine levels of correction for a slow and gentle
approach to learning new boundaries
Questions on programming should be directed to Technical
Support @ 888.392.2007 x 1751
Programming Guide V4.1 OT-300
Mini Receiver Code
Programming Guide – V 4.2
OT-300 Transmitter
EcoLite, Rechargeable Receiver Code
Three Button Design
The up or down buttons are used to
increase or decrease the menu selections or
to increase or decrease the setting within
each menu. The center button is used to
select a menu option or setting within each
menu.
Page 1 of 5
©20101Perimeter Technologies, Inc
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pet Stop OT-300
Summary of Contents for Pet Stop OT-300
- Page 1 The Menu of Settings The OT-300 includes a menu of settings to program each receiver that include: • Signal Field Width – variable settings from 0 to 32 feet • Receiver Sensitivity – used to help match receivers to a boundary •...
- Page 2 3 seconds or simply unplug the transmitter for 5 seconds. Alternatively, by doing nothing the transmitter will return to normal operation after 20 seconds. Programming Guide V4.1 OT-300 Page 2 of 5 ©20101Perimeter Technologies, Inc...
- Page 3 Note: You can only advance or decrease the setting one level at a time. After making an adjustment the display will stop blinking for 2 seconds and then begin to blink again. Once the display begins to blink another adjustment can be made. Programming Guide V4.1 OT-300 Page 3 of 5 ©20101Perimeter Technologies, Inc...
- Page 4 Invisible Fence 800 64** Series Sets the amount of Stopper Stopper Disabled time to shock after Receiver leaves Mode 2 seconds the signal field 4 seconds 6 seconds Programming Guide V4.1 OT-300 Page 4 of 5 ©20101Perimeter Technologies, Inc Mini Receiver Code...
- Page 5 Programs receiver and transmitter * Denotes factory default settings ** Program Receiver for 7Khz when using Dog Watch ***4Khz only works with Pet Stop or Dog Watch modulation ****UltraElite Series 2 only Programming Guide V4.1 OT-300 Page 5 of 5 ©20101Perimeter Technologies, Inc...
Need help?
Do you have a question about the OT-300 and is the answer not in the manual?
Questions and answers