Advertisement
Outdoor Transmitters
Your transmitter comes complete with these standard features:
Built-in Lightning Protection with Zapp Alert® Warning
Remember: Do not allow your pet outside during a lightning storm.
Wire Break Warning System
Your transmitter also has a built-in sensor which monitors the boundary wire. If, for any reason, the wire
becomes broken, the transmitter display will flash and a continuous single beep will alert you to the
problem. Unplug the transmitter and contact your local Pet Stop dealer to assist you in locating and
repairing the wire break correctly.
Fully Adjustable Signal Field
Your transmitter is also completely adjustable. Press the up and down buttons located on the front of
the transmitter to adjust the signal field for your specific installation. Please see 'ADJUSTING SIGNAL
FIELD' on page 7. The range displayed has a range from 01 to 32. For example, if your range is set to 16
this indicates there is 8 feet of signal field on either side of the boundary wire for a total of 16 feet.
Your Pet Stop dealer has set the signal field range appropriate for your
installation. Before adjusting the signal field width contact your dealer.
We recommend that your dog be on a leash or carefully supervised if the
transmitter is not functioning.
Pet Stop | Owner's Guide
Traditionally, lightning is one of the most common causes of
transmitter failure. Pet Stop has developed built-in surge and
over-voltage protection for both the electrical outlet and any high
voltage carried by the buried wire in your yard.To add extra
protection for you and your pet, we have added Zapp Alert®, an
audio-visual indication feature should lightning damage your unit. If
your transmitter experiences an electrical surge, the transmitter will
continue to sound two short beeps. If this happens, contact your
local Pet Stop dealer for service immediately.
06
Advertisement
