Chevrolet B7 2001 Owner's Manual page 90

4. Connect lift chains to the tow bar and raise the tow
bar until lift chain slack has been taken up and the
hardwood beam is fully seated against the spring
shackle brackets as shown.
A. Shackle Bracket
B. Tow Bar
5. Raise the vehicle to the required height.
3-10
C. Lift Chain
D. Hardwood Beam
Towing the Vehicle with the Front Bumper Installed
1. Connect and lock the lift chains to the front axle, outside
of the spring anchor plates as previously shown.
2. Place a 6 x 6 x 5 hardwood beam underneath
i
and slightly behind the front spring shackle brackets
as previously shown.
3. Connect the lift chains to the tow bar and take up the
slack in the chains until the tow bar is within 4 of
the front bumper facing. Place a 2 x 2 x 40
hardwood board with rubber pads against the front
bumper and secure as shown.