Advertisement
Advertisement
Table of Contents
Related Manuals for SKY-HERO Loki MK2
Summary of Contents for SKY-HERO Loki MK2
- Page 2 A d v a n c e d S e t t i n g s U s e r M a n u a l GCS VERSION : 2.10.0 CONTENTS Max Tilt Angle Flight Mode React Mode Device LED brightness GCS Led Brightness Button Allocation Device Binding (pairing)
- Page 3 MAX TILT ANGLE BOOST In addition to the normal angle setting, the Loki MK2 system will allow you to program a boosted max tilt angle value for each device that you can activate by turning the boost on. When triggered, a ‘’S’’ will appear on the top bar of your GCS telemetry to indicate that you are flying in ‘speed’/’boost’...
- Page 4 Angle Boost. Having both the Angle Boost and React mode make the Loki MK2 flying experience more similar to that of a racing drone; any loss of control or shock in these circumstances could result in severe damage to the UAV.
- Page 5 Before first use, the Loki MK2 UAV will need to be paired to your GCS. This process must be done only once and will link the Loki MK2 to one of the 4 Device Buttons on your GCS. A Loki MK2 can only be paired to a...
- Page 6 Loki MK2 and GCS are now communicating. This process can be repeated as many times as you want: as such you can re-pair your Loki MK2 to any other Device Button on your GCS or to any other GCS by simply repeating the pairing process. Your UAV records the last pairing, so you do not need to undergo the entire pairing process again, unless the UAV needs to be paired to another Device Button/GCS.
- Page 7 h. Joysticks Calibration Your GCS is calibrated upon delivery, but with time and wear the neutral and maximal values from the GCS joystick may change and require calibration. There are some good indicators which signal a need for calibration: • if no hovering is possible with any UAV •...
Need help?
Do you have a question about the Loki MK2 and is the answer not in the manual?
Questions and answers