Overview of XLE and XLT
1. Function Keys
2. Touchscreen
3. Navigation Keys
4. USB Mini-B Port
5. High Capacity microSD Slot
6. RS232/RS485 Serial Ports (2)
7. Wide-Range DC Power
8. CAN Port
9. Ethernet LAN Port (XLEe and XLTe only)
10. Optional Built-In I/O (Models 2-6 only)
11. Configuration Switches
12. Mounting Clip Locations
13. DIN Rail Clip
14. Softkeys
NOTE: See Precaution #12 on a bout USB and grounding.
CONTROLLER OVERVIEW
Power Wiring
NOTE: The Primary Power Range is 10VDC to 30VDC.
DC Input / Frame
Power Up
Page 3
Primary Power Port Pins
PIN
Signal
1
Ground
Frame Ground
2
DC-
Input Power Supply Ground
3
DC+
Input Power Supply Voltage
Solid/Stranded Wire: 12-24 awg (2.5-0.2mm)
l
Strip length: 0.28" (7mm)
l
Torque, Terminal Hold-Down Screws: 4.5 – 7 in-lbs
l
(0.50 – 0.78 N-m)
DC- is internally connected to I/O V-, but is isolated
l
from CAN V-. A Class 2 power supply must be used.
1. OPTION: Attach ferrite core with a minimum of two
turns of the DC+ and DC- signals from the DC supply
that is powering the controllers.
2. Connect to earth ground.
3. Apply recommended power.
Description