Error Codes And Flashing Sequences - HomeMatic HmIP-P-DRG-DALI Installation And Operating Manual

7

Error codes and flashing sequences

Flashing code
/ LC display
Short orange
flashes (every
10 s)
6x long red
flashes
1x orange and
1x green flash
E14
E19
E20
E21
E22
E31
Search on the DALI
bus for addressed
DALI devices that
are still unknown to
the gateway
DALI exchange
DALI reset
Meaning
Pairing mode active Enter the last four numbers of
Device defective
Test display
DALI bus faulty
DALI light not ac-
cessible
DALI "control gear
failure"
DALI "lamp failure"
DALI "limit error"
DALI search (un-
addressed devices)
failed
Error codes and flashing sequences
Found devices are addressed and
assigned to the next free chan-
nels (1..32).
Exactly one device on the bus is
missing or defective and a new
device is available on the bus,
then this device is integrated.
Reset of all DALI devices on the
bus.
Solution
the device's serial number to
confirm (see see „5.3 Pairing" on
page 36).
Please see your app for error
message or contact your retailer.
You can continue once the test
display has stopped.
Check the DALI bus
Check the DALI light
Check the DALI light
Check the DALI light
Check the DALI light
Check the DALI bus and try
again.
39