Husqvarna W25P Operator's Manual page 12

Maintenance schedule
Make sure you obey the maintenance schedule. The intervals are calculated from daily use of the product.
The intervals are different if you do not use the product every day. Only do maintenance written in this
manual. Speak to an approved service center about other maintenance not found in this manual.
Maintenance procedure
Inspect the whole unit for damage,
leakage or spillage
Inspect all accessible fasteners
Inspect all screws/nuts/bolts
Check the hoses and fittings
Clean for any debris
Inspect and clean the fuel tank
Inspect and clean the fuel filter
Inspect and clean the air cleaner
Check the operation of the throttle
lever and stop switch
Empty the fuel tank
Clean or re-adjust the spark plug
gap
Inspect the muffler for damage.
Clean the muffler and the cylinder
exhaust port
Clean the cylinder fins and intake air
cooling fan
Check the impeller and impeller
clearance.
Check the pump inlet valve.
Daily Weekly
Overall
√
√
√
√
√
Engine
√
√
√
√
√
√
√
Pump
Monthly
Tighten or replace if necessary
Tighten or replace if necessary.
Adjusting screws are not
included.
Make sure the gap is
0.6-0.7mm (.025in).
Replace if necessary
Replace if necessary
√
√
√
√
Note
11