Sony SU-WL500 Installation Manual page 8

Step 5:
Installing the display
on the wall
WARNING
Be sure to complete the installation before
connecting the AC power cord to the wall outlet. If
you allow the AC power cord to be pinched under
or between pieces of equipment, this may result
in a short circuit or an electric shock.
Be careful not to stumble over the AC power cord
or the display, as you may hurt yourself.
1
Connect the AC power cord and
the connecting cable(s) supplied
with the display to the display.
Connect the AC power cord and the connecting
cable(s) to the connectors on the rear of the
display. For details on connecting the AC power
cord and the connecting cable(s), refer to the
instruction manual of the display.
Notes
• You cannot connect the cables to the display after
installing it on the Base Bracket.
• Subcontract the cable routing in the wall to a
licensed contractor.
8
(GB)
2
Install the display onto the Base
Bracket.
 Referring to the Screw and Hook locations
diagram/table on page 21, determine the
holes of the Base Bracket for latching the
upper hooks of the Mounting Hook.
 Hold the display securely with both hands,
and gently align it on the wall.
WARNING
• Be sure that two or more persons hold the display
when carrying it.
• When carrying the display, hold it in landscape
orientation, and take care not to drop it when
installing. Do not apply excessive force to the
display; otherwise, it may be deformed.
Mounting Hook
Base Bracket