Sony SU-WL500 Installation Manual page 3

There are 4 types of installation. It may not be possible to install some types of displays. Check the following
and install your display in the adequate way.
AC adaptor holder kit SU-AH1 is not be able to installed.
A: Landscape, -20° leaning
To install the display to the wall, the SU-WL500 Wall-Mount Bracket is necessary. Screws and spacers listed
below are also necessary depending on the way of installation.
For further details/terms & conditions, contact the sales representative for professional use.
Display model Installation type
FW-85BZ35F
FW-75BZ35F
FW-65BZ35F
FW-55BZ35F
3
FW-49BZ35F*
FW-43BZ35F
*1
You cannot install the display other than the noted types.
For the display with , the following are necessary.
*2
Spacer: a washer with an outside diameter of 18 mm, inside diameter of 10 mm, and thickness of 2 mm
(SONY Part Number 7-688-000-32) × 20
Screw: PSW M6 × 25 mm (SONY Part Number 4-577-326-01) × 4 (1 pk)
*3
Make brightness setting to Standard or Custom 37 and lower.
*4
When installing FW-49BZ35F or FW-43BZ35F in portrait orientation, a portion of the Base Bracket is not
hidden behind the display.
B: Landscape, +60° leaning
*1
Spacer

C
A
B

4
C*

4
D*

4
C*

4
D*
C: Portrait, no leaning
Wall-Mount Bracket
*2
Model
SU-WL500
D: Portrait, +20° leaning
Qty
1
3
(GB)
GB