Sony SU-WL500 Installation Manual page 12

4
Make sure that the screw 
firmly secures the arm base of
the Mounting Hook (both left
and right).
FW-65BZ35F/FW-55BZ35F
FW-49BZ35F
Note
Make sure that the two arms are screwed in securely.
5
Remove the screws for the
stands from the display (FW-
65BZ35F/FW-55BZ35F only).
Since the stands are removed when you hold up
the display, be sure to hold the display securely
so that the display does not fall down.
FW-65BZ35F/FW-55BZ35F
12
(GB)
Step 5:
Installing the display
on the wall
WARNING
Be sure to complete the installation before
connecting the AC power cord to the wall outlet. If
you allow the AC power cord to be pinched under
or between pieces of equipment, this may result
in a short circuit or an electric shock.
Be careful not to stumble over the AC power cord
or the display, as you may hurt yourself.
1
Connect the AC power cord and
the connecting cable(s) supplied
with the display to the display.
Connect the AC power cord and the connecting
cable(s) to the connectors on the rear of the
display. For details on connecting the AC power
cord and the connecting cable(s), refer to the
instruction manual of the display.
Notes
• You cannot connect the cables to the display after
installing it on the Base Bracket.
• Subcontract the cable routing in the wall to a
licensed contractor.