Parkside PABS 20-Li G8 Translation Of The Original Instructions page 227

GB
We hereby confirm that the Charger / Battery
Design Series PLG 20 C1/ PAP 20 B1
Serial number: 000001 - 170000, IAN 499599_2204
conforms with the following applicable relevant version of the UK guidelines:
Fn order to guarantee consistency, the following harmonised standards as well as
national standards and stipulations have been applied:
EN 60335-2-29:2004/A11:2018 • EN IEC 63000:2018
EN IEC 61000-3-2:2019 • EN 61000-3-3:2013/A1:2019
This declaration of conformity (22)** is issued under the sole responsibility of
the manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
04.12.2022
* The object of the declaration described above satisfies the provisions of Directive
2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting the use
of certain harmful substances in electrical and electronic appliances.
** The last two digits of the year in which the CE marking was affixed.
2014/30/EU • 2014/35/EU
2011/65/EU* & (EU) 2015/863
EN 60335-1:2012/A2:2019 • EN 62233:2008
IEC 62133-2:2017 • EN 62841-1:2015 Appendix K
EN 55014-1:2017/A11:2020 • EN 55014-2:2015
Translation of the original
EC declaration of conformity
Christian Frank
Dokumentationsbefuldmægtiget
95