Compaq Prosignia 150 Series Maintenance And Service Manual page 64

Index Page
Product Description
Revised: September 16, 1999
MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Preface -or-
Illustrated Parts Catalog
Removal & Replacement
Touchpad Assembly
Notice Specifications
Troubleshooting
Battery Pack
Removal & Replacement
4. Turn the computer
over (right side up),
pull forward on the
display latches to
release and open the
display assembly.
5. Lift up front end of
the palmrest cover with
touch pad and remove
it from the groove in
the chassis.
6. Tilt the palmrest
cover with touch pad,
allowing it to rest on
top of the keyboard,
and disconnect the flex
cable from the LIF
connector on the
palmrest cover.
CAUTION: When
replacing the
palmrest cover
with touch pad,
ensure that the
cable is fully
inserted into the
LIF connector on
the system
board. If the
metal end comes
in contact with
the keyboard, it
could damage
the computer.
To replace the palmrest
cover with touch pad,
reverse the previous
procedures.
When replacing
the palm rest
cover, ensure
that the cable is
NOTE:
properly routed
through the slot
on the Upper
CPU cover.
Return to Removal &
Replacement Index
.
Page