Carrier TOSHIBA MMK-UP0301HP-UL Service Manual page 148

No. Part name
1) Follow to the procedure in the item ③
Drain pan
7
assembly
2) Remove screw holding the electric part cover.
3) Remove fixing screws of the unit display and
4) Disconnect the middle connector of louver
5) Remove 2 fixing screws from the drain pan
Procedures
remove unit display.
motor code (5P)
then remove the drain pan assembly from the
body back.
Screws
<To re-installation>
- Press the drain pan into the back body
- Please confirm that drain pan is attached
certainly.
- Please confirm that center arm of drain pan
has fitted into back body certainly.
Fit
Center arm
of drain pan
Boss of back body
- 148 -
Remarks
Middle connector
Unit display
Screw