Carrier TOSHIBA MMK-UP0301HP-UL Service Manual page 147

No. Part name
5
Horizontal louver
6
Drain hose
Procedures
1) Remove shaft of the horizontal louver
from the drain pan. (First remove 2 the
center shafts then remove the other shafts.)
1) Follow the procedure item 3 .
2) The drain hose can be removed by removing
the screw securing the drain hose and then
pulling out the drain hose.
3) When removing the drain hose, be careful of
any sharp edges of steel plate. The edges may
cause injury.
Drain pan Heat insulator
of drain pan
Steel plate
of Drain hose
<To re-installation>
- To install the drain hose, insert the drain hose
firmly until the connection part contacts with
heat insulator, and then secure it with original
screw.
Drain hose
Screw
- 147 -
Remarks
Drain pan
Horizontal louver (Back)
Horizontal louver (Front)
Drain pan
Drain hose
Bend and
remove