Compaq PRESARIO Presario 1255 Maintenance And Service Manual page 55

Models: 1255, 1256, 1260, 1262, 1266, 1267, 1272, 1273, 1274, and 1275
Before You Begin
Removal Sequence
Product Description
To replace the processor complete the
following steps:
1. Insert the processor into the slot on the system board.
The notch on the left corner of the processor serves as an
orientation indicator. Align the notch on the left corner of the
NOTE:
processor with the notch on the left corner of the processor
chassis slot.
When installing the processor into the chassis slot, be sure
that the hole pattern on the chassis slot lines up with the
NOTE:
pins on the processor. The processor should drop into the
socket without any force.
2. Insert a small blade screw driver into the top slot opening on the
processor and push it away from the display to lock the processor.
3. Verify the switch
Return to Removal & Replacement Procedures
Presario 1200 Series
Specifications
Troubleshooting
Pin Assignments
settings.
Parts Catalog
Battery Operations
Index